Optical Fiber Splicing Aerial Splice Enclosure 6 port Horizontally
24 cores
1.1 Features:
- Advanced internal structure design
- Easy to re-enter, it never requires re-entry tool kit.
- The closure is spacious enough for winding and storing fibers
- Fiber Optic Splice Trays(FOSTs) are designed in SLIDE-IN-LOCK and
its opening angle is about 90°
- The curved diameter meets with international standard
- Easy and fast to increase and reduce FOSTs
- Straight-through for un-cutting and branching for cut
- Lay adapters suit for FTTH and easy to operate
1.2Applications
- Suitable fo
- e-mounting
- underground and duct-mounting
1. Scope of application
This Installation Manual is suit for the Fiber Optic Splice Closure
(Hereafter abbreviated as FOSC), as the guidance of proper
installation.
The scope of application is: aerial, underground, pipeline, handhole. The ambient temperature ranges from -40 to 65°C.
2 Main components
No. | Name of components | Quantity | Usage | Remarks |
1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: 330x188x110 (mm) |
2 | Fiber optic splice tray (FOST) | max 9 pieces (bunchy) max. 6 pieces (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24,48(cores) Ribbon:12 (pieces) |
3 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
4 | Port plug | 6 pieces | Sealing empty ports | |
6 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing
testing | Configuration as per requirement |
7 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing
connection | Configuration as per requirement |
3 Main accessories and special tools
No. | Name of accessories | Quantity | Usage | Remarks |
1 | Heat shrinkable protective sleeve | | Protecting fiber splices | Configuration as per capacity |
2 | Nylon tie | | Fixing fiber with protective coat | Configuration as per capacity |
3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
5 | Hanging hook | 1 set | For aerial use | |
6 | Earthing wire | 1 piece | Putting through between earthing devices | |
7 | Abrasive cloth | 1 piece | Scratching fiber cable | |
8 | Labeling paper | 1 piece | Labeling fiber | |
9 | Special wrench | 3 pieces | Fixing bolts, tightening nut of reinforced core | |
10 | Measuring paper | 1 piece | To measure circle, of which its diameter is enlarged with seal tape | |
11 | Buffer tube | To be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. | |
4 Characteristics
4.1 The closure is used for splicing part of main fiber cable with
branching fiber cable, and meanwhile splicing its rest part with
pigtail, connecting optical exchange equipment via patchcord.
Therefore it saves costs by eliminating splicing unit, distribution
unit, distribution box and all the work between fiber optic splice
closure and distribution box.
4.2 It is easy and fast to increase FOST. The SLIDE-IN-LOCK design of
FOST with the opening angle 900 makes expansion and maintenance convenient.
4.3 The distribution unit can have FC, SC, ST, LC adapter front panel
to meet with customers various needs. The installation is very
easy.
4.4 Inovative design, easy installation. Based on the advanced formula,
the plastic part is made of injection-molded, high-strength
engineering plastic PC. It ensures long-term reliability and usage
under ambient temperature -40°C- +65°C.
4.5 The elastic intergrated seal fitting, our patented product, can be
reused for many times, it ensures good-resealing performance
4.6 Multi-functional fiber optic splice closure can be used for
wall-mounting and pole-mounting application. It saves the cost for
FTTH application and improve quality of telecommunication.
4.7 The closure is used for splicing part of main fiber cable with
branching fiber cable, and meanwhile splicing its rest part with
pigtail, connecting optical exchange equipment via patchcord.
Therefore it saves costs by eliminating splicing unit, distribution
unit, distribution box and all the work between fiber optic splice
closure and distribution box.
4.8 It is easy and fast to increase FOST. The SLIDE-IN-LOCK design of
FOST with the opening angle 900 makes expansion and maintenance convenient.
4.9 The distribution unit can have FC, SC, ST, LC adapter front panel
to meet with customers various needs. The installation is very
easy.
4.10 Inovative design, easy installation. Based on the advanced formula,
the plastic part is made of injection-molded, high-strength
engineering plastic PC. It ensures long-term reliability and usage
under ambient temperature -40°C- +65°C.
4.11 The elastic intergrated seal fitting, our patented product, can be
reused for many times, it ensures good-resealing performance
4.12 Multi-functional fiber optic splice closure can be used for
wall-mounting and pole-mounting application. It saves the cost for
FTTH application and improve quality of telecommunication.
