Glue Seal Splice Closure FTTH Optical Fiber Distribution Box 6 Port
Features:
Convenient to increase or reduce trays/ cassette for capacity
requirement
Improved reinforce rebar on the body of closure make excellent
performance under impact, pulling, tension etc
3 fixing item/designs to prevent fiber cable from external effect
Spacious place for storing and maintenance
adapter plug-in fits a variety of adapters such as SC, FC, LC
(duplex).
Can be used from 40 °C to +65°C temperature range
Integrated seal, air tight and water proof, flame-retarded
Suitable for aerial, wall, underground duct or direct burial
applications
Applications
Suitable for bunchy fibers
Aerial,underground,wall-mounting,hand hole-mounting and
duct-mounting
It's especially applicable to FTTH optical fiber distribution
OFS-FTH-502 Fiber Optic Splice Closure Datasheet
Model No. | Size (mm) L×W×H | Core capacity | Cable Ports (max) | Max diameter of cable (mm) | Adapter and holes of Front Panel |
OFS-FTH-502 | 323x202x86 | 48 cores | 6 | 2×Ø20
2×Ø16
2×Ø13 | FC adapters:6PCS |
SC adapters:8PCS |
ST adapters:8PCS |
LC adapters:8PCS |
2.2 Main components
No. | Name of components | Quantity | Usage | Remarks |
1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: 240x148x76(mm) |
2 | Fiber optic splice tray (FOST) | Max 8 pieces (bunchy) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy: 12,24, (cores) |
3 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
4 | Port plug | 6 pieces | Sealing empty ports | |
6 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing
testing | Configuration as per requirement |
7 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing
connection | Configuration as per requirement |
| | | | | |
2.3 Main accessories and special tools
No. | Name of accessories | Quantity | Usage | Remarks |
1 | Heat shrinkable protective sleeve | | Protecting fiber splices | Configuration as per capacity |
2 | Nylon tie | | Fixing fiber with protective coat | Configuration as per capacity |
3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
4 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. | |
5 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
6 | Hanging hook | 1 set | For aerial use | |
7 | Earthing wire | 1 piece | Putting through between earthing devices | |
8 | Abrasive cloth | 1 piece | Scratching fiber cable | |
9 | Labeling paper | 1 piece | Labeling fiber | |
10 | Special wrench | 2 pieces | Fixing bolts, tightening nut of reinforced core | |
11 | Measuring paper | 1 piece | To measure circle, of which its diameter is enlarged with seal tape | |
12 | Buffer tube | To be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
3. Necessary tools for installation
3.1 Supplementary materials (to be provided by operator)
Name of materials | Usage |
Scotch tape | Labeling, temporarily fixing |
Ethyl alcohol | Cleaning |
Gauze | Cleaning |
3.2 Special tools (to be provided by operator)
Name of tools | Usage |
Fiber cutter | Cutting off fibers |
Fiber stripper | Strip off protective coat of fiber cable |
Combo tools | Assembling FOSC |
