Fiber Media Converter Single Mode SM SC 10 / 100 / 1000 Base - Tx
to 1000 Base - FX
Main features
◆The UTP port supports MDI / MDI-X auto crossover.
◆Supporting the max 1536 bytes packets
◆The transmission of a channel signals can be completed by single
fiber. It has doubled in quantity of fiber data transmission
compared with twin fiber.
◆Auto negotiation function allows UTP port to auto select
10/100/1000M and Full Duplex or Half Duplex
◆Adopting internal power supply to insure equipment at long-hours
work stably.
10/100/1000M Singlemode Single Fiber Converters
OFS Gigabit Single Fiber Converter can convert Optical－Electric
Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M
optical fiber interface (FX).
The traditional 10/100/1000M gigabit Ethernet can be extended to
the distance of 90km through single optical fiber link.
The performance and quality of the products are excellent because
of adopting latest Gigabyte IC from USA and Taiwan.
It must be used in couples,because the transmitted optical differs
from the receive optical in wavelength.
6 Group LED indicated lights could fully monitor the working
conditions of converters.
It is easy for users to observe and diagnose the failure of
converters.
Technical Specifications
| Power | AC. 220V(170-260V),50Hz; DC. 5V,2A |
| Operating standards | IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX |
| MAC address table | 4K |
| Data Buffer | 256K |
| Connector | UTP: RJ-45,10/100/1000Mbps； Fiber: SC,1000Mbps |
| Cable | UTP: Cat.5e or Cat.6 (the max distance up to 100m) Fiber (singlemode): 8.3/125, 8.7/125, 9/125, 10/125µm (the max
distance up to 90km) |
| Flow control | Full Duplex: IEEE802.3x Half Duplex: back pressure |
| Ambient temperature | 0 ～ +50℃ |
| Storage temperature | -20 ～ +70℃ |
| Humidity | 5% ～ 90% |
| Dimensions | 40 (high) x 110(width) x 140 (length) mm |
Fiber Optic Information
Type | connector | Max distance | Wavelength | TX power | Sensitivity | Link Budget |
OFS-GWS01/02-20 | SC | 20km | 1310/ 1550nm | -11 ～-5dBm | -23dBm | 12dBm |
OFS-GWS01/02-40 | SC | 40km | 1310/ 1550nm | -5/-8 ～0dBm | -26dBm | 21/18dBm |
OFS-GWS01/02-60 | SC | 60km | 1310/ 1550nm | 0/-5 ～2dBm | -26dBm | 26/21dBm |
OFS-GWS01/02-80 | SC | 80km | 1490/ 1550nm | -2 ～3dBm | -26dBm | 24dBm |
Order Information
Model | Product description |
OFS-GWS01/02 -xx | 10/100/1000M singlemode single fiber converters must be used and
ordered in couples. One set of WS01 must be connected with another
set of WS02 for using. WS01 transmitted optical wavelength 1310nm,
receive optical wavelength 1550nm; WS02 transmitted optical
wavelength 1550nm, receive optical wavelength 1310nm. The max
distance of fiber is up to 20, 40, 60 or 80km. XX is the amount of
distance. |
