10 Gigabit Data Center Switch L2 12 10G SFP+ Optical ports 8 10 /
100 / 1000M RJ45
Product Overview
12+8+1 10Gigabit Data Center Switch is layer 2 non-blocking switch
with Broadcom chip. Providing 258Gbps switching capacity and
192Mpps forwarding performance, L2 / L3 full wire-speed forwarding.
Its flexible networking capability ensures the stability of the
network and the balance of the load link. With the modular design,
it provides 12 10G SFP+ optical ports, 8 10/100/1000M RJ45
electrical ports, 1 Console port, 1 OOB management port, which
offer enough bandwidth for data aggregation and data exchange. And
in order to flexibly respond to the network requirements, users can
select appropriate 10G ports according to their needs.With high
bandwidth and low latency, pipe network., OFS-6410-12HC located in
density of the next generation of data center and cloud computing
network access, can also be used for large Internet cafes, the core
of enterprise network, metropolitan area network, or aggregation.
Product Feature
Remarkable performance
1. With 258Gbps backplane bandwidth, the industry the highest
performance (1U TOR);
2. Hardware routing, wire speed packet rate reached 192Mpps, L2 /
L3 forward full speed;
3. Able to be deployed in the Metropolitan Area Network and provide
several last kilometer technology.
Safe and Reliable
1. Provide DOS, DDOS, spoofing and virus defense;
2. Support IEEE802.1x, provide port-based user authentication,
network shield, safety control, and policy control technology;
3. Restrict the maximum number of hosts connected with the port,
multi-binding Ethernet interface , increasing bandwidth and system
redundancy;
4. Powerful ACL, support L2-L4 data filtering;
5. Policy control list and flow regulation.
Convenient in operation and maintenance
1. Support flexible port configuration;
2. Management support with Web, SNMP and telnet;
3.Support XModem protocol, use TFTP/ZMODEM to software upgrading
and BootRom upgrading;
4.Support SFP+, also backwards compatible XFP;
5. Enter or exit low-power condition from PHY.
Powerful Flow and Broadcast Management
1. Automatically detect and control broadcast storm, support IGMP
packets detection, effectively limit the flooding of broadcast
packets;
2. Support Ethernet interface taking 1M as the step length for rate
limiting.
3. Support full duplex mode and half duplex mode flow control;
4. Support IP multicast and QoS.
Product's Technical Parameters
| Product model | 12+8+1 |
| Basic Characteristics |
| Fixed port | 12 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports |
| Console port | 1 |
| Backplane bandwidth | 258Gbps |
| Packet forwarding rate | 192Mpps |
| Jumbo frames | 12k bytes |
| Transfer mode | Support store-forward mode and cut-through mode |
| IPv4/IPv6 route | 512/256 |
| MAC address table | 16K |
| Packet Buffer | 2MB |
| VLAN ID | 4K |
| Memory capacity | 512MB DDR3 SDRAM |
| Flash memory capacity | 8MB |
| CPU | 600 MHz ARM Cortex-A9 single-core processor |
| Soft Specification |
| Security feature | IP+MAC+PORT+VLAN binding ARP inspection DOS defend Port protect IP Source Guard binding |
| VLAN | Port based VLAN 802.1Q VLAN IP based VLAN MAC based VLAN |
| MAC address table | Static MAC address table Dynamic MAC address table |
| Storm Control | Broadcast suppression Multicast suppression DLF suppression Limiting rate |
| Traffic Control | Half-duplex control based on the back pressure type Full-duplex control based on the PAUSE frame |
| Port Mirror | Support port mirror |
| Port management | General setting Port counting Config port Port trunk Port-isolation |
| QoS | IEEE 802.1Q Congestion mechanism Each port has 8 send queue mapping to 8 802.1p priority |
| IP services | Ping detection DHCP Snooping |
| Spanning Tree Protocol | MSTP(802.1s),STP,RSTP |
| Multicast management | IGMP Snooping frame |
| System management | Support SNMP v1/v2 Support Console Support TELNET Support WEB |
| Remote Upgrade | Support version upgrading via web Support version upgrading via
local |
| Physical Characteristics |
| External Dimension | 440mm*285mm*44mm |
| Power Supply Features | AC: 110V～260V |
| Power | ≤100W |
| Indicator light | Power indicator, system, connection/sending and receiving
instructions |
| Environment temperature/humidity | Operating temperature: 0°C～50°C (0m～1800m) ; Storage temperature: -40°C～+70°C; Relative humidity: 5%RH～95%RH, Non-condensing. |
